Cur síos ar Tháirgí
Dícheangail thapa PVC Is féidir críochfort baineann inslithe vinil a nascadh leis an gcríochfort sluasaid fireann agus tugtar críochfort sos tapa air. Is é an t -ábhar muinchille inslithe PVC, a bhfuil feidhm inslithe agus lasair lasair aige, agus is féidir leis an teocht ard de 75 céim a sheasamh. Is é an t -ábhar teagmhála ná H65 práis stánaithe, frithsheasmhach in aghaidh ocsaídiúcháin, creimeadh, seoltacht ard, friotachas íseal. Is féidir nasc deiridh agus crochadh dúbailte a roghnú chun a chinntiú go bhfuil an limistéar teagmhála idir an tsreang agus an teirminéal mór, go bhfuil crochadh níos déine, agus go bhfuil an seoltacht níos fearr. baol
Sonraíocht Táirge
 |
 |
 |
|
RAON WIRE |
MÍR UIMH. |
TAB NEMA |
TOISE mm(orlach) |
QTY Mála láimhe |
|||||||
|
mm² (A.W.G.) |
Tiús ×Leithead mn orlach |
W |
F |
L |
B |
D |
d1 |
T |
|||
|
0.5-1.5 (22-16) |
Fdv 1-110 (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(256) |
19.0(.748) |
10.5(413) |
3.8(.150) |
1.7(.067) |
0.3(.012) |
1000 |
|
Fdv 1-110 (8) |
0.8×2.8 |
.032X.110 |
3.2(126) |
||||||||
|
FDV1-187(5) |
0.5×4.75 |
.020×.187 |
5.0(197) |
6.4(252) |
19.4(764) |
0.35 (.014) |
|||||
|
Fdv 1-187 (8 |
0.8×4.75 |
.032×.187 |
5.0(.197) |
||||||||
|
Fdv 1-205 (5) |
0.5×5.2 |
.020X.205 |
5.7(224) |
5.8(.228) |
19.3(.760) |
||||||
|
FDV1-205(8) |
0.8×5.2 |
032×.205 |
0.4(016) |
||||||||
|
Fdv 1-250 |
0.8×6.35 |
032×.250 |
6.6 (260) |
7.5(.295) |
20.8(.819) |
0.4(.016) |
|||||
|
1.5-2.5 (16-14) |
Fdv 2-110 (5) |
0.5×2.8 |
020×.110 |
3.2(126) |
6.5(.256) |
19.0(.748) |
10.5 (413) |
4.3(.169) |
2.3(.091) |
0.3(.012) |
1000 |
|
Fdv 2-110 (8) |
0.8×2.8 |
032×.110 |
3.2(.126) |
||||||||
|
Fdv 2-187 (5) |
0.5×4.75 |
020×.187 |
5.0(197) |
6.4(.252) |
19.4(.764) |
0.35(014) |
|||||
|
Fdv 2-187 (8) |
0.8×4.75 |
032×.187 |
5.0(.197) |
||||||||
|
FDV2-205(5 |
0.5×5.2 |
020×.205 |
5.7(224) |
5.8(228) |
19.3(.760) |
||||||
|
Fdv 2-205 (8) |
0.8×5.2 |
032×.205 |
5.7(.224) |
5.8(228) |
19.3(.760) |
||||||
|
Fdv 2-250 |
0.8×6.35 |
032×.250 |
6.6(260) |
7.5(.295) |
20.8(.819) |
0.4(.016) |
|||||
|
4-6 (12-10) |
FDV5-250 |
0.8×6.35 |
032×.250 |
6.6(260) |
7.5(295) |
23.3(917) |
13.5(.531) |
5.4(.213) |
3.4(134) |
0.4(.016) |
500 |
|
FDV5-375 |
1.2×9.4 |
047×.375 |
10.0(394) |
12.0(472) |
28.6(1.126) |
0.5(.020) |
|||||
 |
 |
 |
|
RAON WIRE |
MÍR UIMH. |
TAB NEMA |
TOISE mm(orlach) |
QTYGenericName Mála láimhe |
|||||||
|
mm (A.W.G.) |
Tiús mm |
× orlach leithead |
W |
F |
L |
B |
D |
d1 |
T |
||
|
0.5-1.5 (22-16) |
Fdfv 1-110 (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(256) |
19.0(748) |
10.5(413) |
3.8(.150) |
1.7(067) |
0.3(.012) |
1000 |
|
Fdfv 1-110 (8) |
0.8×2.8 |
.032×.110 |
|||||||||
|
FDFV1-187(5) |
0.5×4.75 |
.020×.187 |
5.0(.197) |
6.4(252) |
19.5(.768) |
0.35(.014) |
|||||
|
EDFV1-187(8 |
0.8×4.75 |
.032×.187 |
|||||||||
|
FDFV1-205(5) |
0.5×5.2 |
.020×.205 |
5.7(224) |
5.8(228) |
20.2(.795) |
||||||
|
FDFV1-205(8) |
0.8×5.2 |
.032×.205 |
|||||||||
|
Fdfv 1-250 |
0.8×6.35 |
032×.250 |
6.6(260) |
7.5(295) |
23.0(.906) |
0.4(.016) |
|||||
|
1.5-2.5 (16-14) |
Fdfv 2-110 (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(256) |
19.0(.748) |
10.5(413) |
4.3(.169) |
2.3(.091) |
0.3 (.012) |
1000 |
|
Fdfv 2-110 (8) |
0.8×2.8 |
032×.110 |
3.2(126) |
||||||||
|
FDFV2-187(5 |
0.5×4.75 |
.020×.187 |
5.0(197) |
6.4(252) |
20.2(.795) |
0.35(.014) |
|||||
|
Fdfv 2-187 (8) |
0.8×4.75 |
032×.187 |
5.0(197) |
||||||||
|
Fdfv 2-205 (5 |
0.5×5.2 |
.020×.205 |
5.7(224) |
5.8(228) |
20.2(.795) |
||||||
|
Fdfv 2-205 (8) |
0.8×5.2 |
.032×.205 |
|||||||||
|
Fdfv 2-250 |
0.8×6.35 |
032×.250 |
6.6(.260) |
7.5(295) |
21.5(.846) |
0.4(.016) |
|||||
|
4-6 (12-10) |
FDFV5-250 |
0.8×6.35 |
032×.250 |
6.6(260) |
7.5(295) |
24.0(.945) |
11.0(433) |
5.4(.213) |
3.4(134) |
0.4(.016) |
500 |
 |
 |
 |
|
RAON WIRE |
MÍR UIMH. |
Néimábach |
TOISCE mm(orlach) |
QTYGenericName MÁLA |
|||||||
|
mm (A.W.G.) |
Tiús × leithead mm orlach |
W |
F |
L |
B |
D |
d1 |
T |
|||
|
0.5-1.5 (22-16) |
Mdv 1-110 (5) |
0.5×2.8 |
.020×.110 |
2.8(110) |
6.5(256) |
19.2(756) |
10.5(413) |
3.8(150) |
1.7(.067) |
0.5(.020) |
1000 |
|
Mdv 1-110 (8 |
0.8×2.8 |
.032×.110 |
0.4(016) |
||||||||
|
Mdv 1-187 (5 |
0.5×4.75 |
.020×.187 |
4.8(189) |
6.5(256) |
19.8(780) |
0.5(.020) |
|||||
|
MDV1-187(8) |
0.8×4.75 |
.032×.187 |
6.7(264) |
0.4(.016) |
|||||||
|
MDV1-250 |
0.8×6.35 |
.032×.250 |
6.35(250) |
7.7(303) |
21.8(.858) |
||||||
|
1.5-2.5 (16-14) |
MDV2-187(5) |
0.5×4.75 |
.020×.187 |
4.8(.189) |
6.5(256) |
19.8(780) |
10.5(413) |
4.3(.169) |
2.3(091) |
0.5(.020) |
1000 |
|
MDV2-187(8 |
0.8×4.75 |
.032×.187 |
6.7(264) |
0.4(.016) |
|||||||
|
Mdv 2-250 |
0.8×6.35 |
.032×250 |
6.35(.250) |
7.7 (.303) |
21.8(.858) |
||||||
|
4-6 (12-10) |
MDV5-250 |
0.8×6.35 |
.032×.250 |
6.35(250) |
7.7(303) |
24.0(945) |
13.5(.531) |
5.4(.213) |
3.4(134) |
0.4(.016) |
500 |
 |
 |
 |
|
RAON WIRE |
Mír uimh. |
Cluaisín NEMA |
TOISE mm(orlach) |
QTYGenericName Mála láimhe |
|||||||
|
mm² (A.W.G.) |
Tiús × leithead mm orlach |
W |
F |
L |
B |
D |
d1 |
T |
|||
|
0.5-1.5 (22-16) |
Fdd 1-110 (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(256) |
19.0(.748) |
10.5(413) |
4.0(.157) |
1.7(.067) |
0.3(012) |
1000 |
|
Fdd 1-110 (8) |
0.8×2.8 |
.032×.110 |
3.2(.126) |
||||||||
|
FDD1-187(5) |
0.5×4.75 |
.020X.187 |
5.0(.197) |
6.4(252) |
19.4(764) |
0.35(.014) |
|||||
|
FDD1-187(8) |
0.8×4.75 |
.032×.187 |
5.0(197) |
||||||||
|
Fdd 1-205 (5) |
0.5×5.2 |
.020×.205 |
5.7(.224) |
5.8(228) |
19.3(.760) |
0.4(.016) |
|||||
|
Fdd 1-205 (8) |
0.8×5.2 |
.032×.205 |
|||||||||
|
FDD1-250 |
0.8×6.35 |
.032×.250 |
6.6(260) |
7.5(295) |
20.8(819) |
0.4(.016) |
|||||
|
1.5-2.5 (16-14) |
Fdd 2-110 (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(256) |
19.0(748) |
10.5(413) |
4.7(185) |
2.3 (.091) |
0.3(.012) |
1000 |
|
FDD2-110(8) |
0.8×2.8 |
032×.110 |
3.2(.126) |
||||||||
|
FDD2-187(5) |
0.5×4.75 |
020×.187 |
5.0(197) |
6.4(252) |
19.4(.764) |
0.35(.014) |
|||||
|
FDD2-187(8) |
0.8×4.75 |
.032X.187 |
5.0(197) |
||||||||
|
FDD2-205(5) |
0.5×5.2 |
.020×.205 |
5.7 (224) |
5.8(228) |
19.3(.760) |
||||||
|
FDD2-205(8) |
0.8×5.2 |
.032×.205 |
5.7 (.224) |
5.8(228) |
19.3(760) |
||||||
|
FDD2-250 |
0.8×6.35 |
032×.250 |
6.6(.260) |
7.5(295) |
20.8(819) |
0.4(.016) |
|||||
|
4-6 (12-10) |
FDD5-250 |
0.8×6.35 |
.032×.250 |
6.6 (.260) |
7.5(295) |
23.3(917) |
13.5(.531) |
6.2(244) |
3.4(134) |
0.4(.016) |
500 |
|
Fdd 5-375 |
1.2×9.4 |
.047×.375 |
10.0(.394) |
12.0(472) |
28.6(1.126) |
0.5(.020) |
|||||
 |
 |
 |
|
Fadréim |
MÍR UIMH. |
Cluaisín NEMA |
TOISE mm(orlach) |
Q Mála láimhe |
|||||||
|
mm² (A.W.G.) |
Tiús × Leithead mm orlach |
W |
F |
L |
B |
D |
d1 |
T |
|||
|
0.5-1.5 (22-16) |
Fdfd 1-110 (5) |
0.5×2.8 |
020×.110 |
3.2(126) |
6.5(256) |
19.0(.748) |
10.5(413) |
4.0(.157) |
1.7(.067) |
0.3 (.012) |
1000 |
|
EDFD1-110(8 |
0.8×2.8 |
.032×.110 |
|||||||||
|
Fdfd 1-187 (5) |
0.5×4.75 |
.020X.187 |
5.0(197) |
6.4(252) |
19.0(.748) |
0.35(.014) |
|||||
|
Fded 1-187 (8 |
0.8×4.75 |
.032×.187 |
|||||||||
|
Fdfd 1-205 (5) |
0.5×5.2 |
.020×.205 |
5.7(224) |
5.8(228) |
20.2(.795) |
||||||
|
FDFD1-205(8 |
0.8×5.2 |
.032×.205 |
|||||||||
|
Fdfd 1-250 |
0.8×6.35 |
032×.250 |
6.6(260) |
7.5(.295) |
21.5(.846) |
0.4(.016) |
|||||
|
1.5-2.5 (16-14) |
FDFD% 7b% 7b0% 7d% 7d (5) |
0.5×2.8 |
.020×.110 |
3.2(126) |
6.5(.256) |
19.0(.748) |
10.5(413) |
4.7(185) |
2.3(091) |
0.3 (.012) |
1000 |
|
Fdfd 2-110 (8) |
0.8×2.8 |
.032×.110 |
3.2(126) |
||||||||
|
Fded 2-187 (5) |
0.5×4.75 |
.020×.187 |
5.0(197) |
6.4(252) |
20.0(.787) |
0.35(.014) |
|||||
|
FDFD2-187(8) |
0.8×4.75 |
.032×.187 |
5.0(197) |
||||||||
|
Fdfd 2-205 (5) |
0.5×5.2 |
.020×.205 |
5.7(224) |
5.8(228) |
20.0(.787) |
||||||
|
Fdfd 2-205 (8) |
0.8×5.2 |
.032×.205 |
|||||||||
|
FDFD2-250 |
0.8×6.35 |
.032×.250 |
6.6(.260) |
7.5(295) |
22.0(.866) |
0.4 (.016) |
|||||
|
4-6 (12-10) |
FDFD5-250 |
0.8×6.35 |
.032×.250 |
6.6(260) |
7.5(295) |
24.5(.965) |
12.5(.492) |
6.2(244) |
3.4(.134) |
0.4(.016) |
500 |
 |
 |
 |
|
RAON WIRE |
MÍR UIMH. |
Cluaisín NEMA |
TOISE mm(orlach) |
Q MÁLA |
|||||||
|
mm² (A.W.G.) |
Tiús × Leithead mm orlach |
W |
F |
L |
B |
D |
d1 |
T |
|||
|
0.5-1.5 (22-16) |
Mdd 1-110 (5) |
0.5×2.8 |
020×.110 |
2.8(110) |
6.5(256) |
19.2(.756) |
10.5(413) |
4.0(.157) |
1.7(.067) |
0.5(020) |
1000 |
|
MDD% 7b% 7b0% 7d% 7d (8) |
0.8×2.8 |
.032×.110 |
0.4(016) |
||||||||
|
Mdd 1-187 (5) |
0.5×4.75 |
.020X.187 |
4.8(189) |
6.5(.256) |
19.8(.780) |
0.5(.020) |
|||||
|
Mdd 1-187 (8) |
0.8×4.75 |
.032×.187 |
6.7(264) |
0.4(.016) |
|||||||
|
MDD1-250 |
0.8×6.35 |
.032×.250 |
6.35(.250) |
7.7(303) |
21.8(.858) |
||||||
|
1.5-2.5 (16-14) |
Mdd 2-187 (5) |
0.5×4.75 |
020×.187 |
4.8(.189) |
6.5(256) |
19.8(.780) |
10.5(413) |
4.7 (185) |
2.3 (.091) |
0.5(.020) |
1000 |
|
Mdd 2-187 (8 |
0.8×4.75 |
032×.187 |
6.7(264) |
0.4(.016) |
|||||||
|
Mdd 2-250 |
0.8×6.35 |
032×.250 |
6.35(.250) |
7.7(303) |
21.8(.858) |
||||||
|
4-6 (12-10) |
MDD5-250 |
0.8X6.35 |
032×.250 |
6.35 (.250) |
7.7(303) |
24.0(.945) |
13.0(512) |
6.2(244) |
3.4(134) |
0.4(016) |
500 |
Maoin Táirge
|
Branda |
C |
|
Cineál Teirminéil |
FIREANN BAINEANN |
| Insliú | PVCName |
| Uimhir Chuid Monaróra | Fdv fdfv mdv fdfd mdd |
|
Déan teagmháil le plating |
STÁN |
|
Ábhar teagmhála |
H65 Prás agus cré-umha fosfair |
|
Voltas oibriúcháin |
600V |
|
Teocht oibriúcháin |
-30 céim go 75 céim |
|
Deimhniú |
|
Iarratas
Sa tionscal cumhachta, ó ghluaisteáin agus ó leictreonaic go feidhmchláir thionsclaíocha, tá ról ríthábhachtach ag cónascaire bullet inslithe PVC. Úsáidtear iad i gcórais leictreacha éagsúla amhail úmacha sreangú feithiclí, painéil rialaithe agus líonraí dáilte. Is féidir iad a mheaitseáil le méideanna éagsúla sreinge chun an t -iarratas a chríochnú.
Grianchumhacht
Carnadh carn
Cumhacht
Ceangal Cumhachta
QA & QC
IATF 16949
ISO 9001
CE
OL
Cumadh
Ár saotharlann
Bunaíodh saotharlann caighdeánach UL i 2005, is iad na trealamh tástála táirgí ná: micreascóp, tástálaí cruas Vickers, speictriméadar, méadar tiús leictreaphlátála, méadar seoltachta tuirbín, tástálaí brú, tástálaí spraeála salainn, tástálaí inslithe, tástáil lasair-retardant, greamairí uirlisí caighdeánach UL, cuir isteach agus tástálaí fórsa ag tarraingt, meaisín teannas.
Pacáiste
Clibeanna Te: dícheanglaíonn tapa PVC vinil inslithe, dícheanglaíonn an tSín go tapa monaróirí PVC vinil inslithe, monarcha